Feb 9, 2024, 12:48 PM

Finger on/off
Full size 1
Finger on/off
Full size 2
The laptop did not boot (black screen, green LED near the CPU);
Found that it boots while holding it with one hand by corner. Thought that it is because the upper case metal plate might have been touching electronic components; disassembled, cut screen protector film into some electric shielding and put it under the main board and between the compute module and the motherboard; cleaned contacts with alcohol, put and screwed everything back.
Now it booted but froze on the login screen immediately after I pressed spacebar. After freezing, applying and releasing pressure removes or puts the graphics artifacts back on screen, the laptop does not unfreeze until reboot.
Rebooted fine, can actually log in, but the laptop freezes every time there is a slight pressure around the spacebar area.
What might my problem be, and what should Ilook at further to diagnose and maybe fix it?