brand new NVMe SSD not detected.

[rtmtree]

I just bought CM5 laptop. and it came with this 1TB NVMe SSD.
.

I plugged it to the laptop. it's not shown in the Disks App that's understandable b/c it's a brand new. So, I followed a lot of instructions on how to formatted it.
(I dont know how to get to CM5 laptop BIOS/UEFI to enable AHCI mode)
most of the command result like there is no NVMe plugged.

So I used "dmesg | grep -i pci" to get error related to PCI and got this.

[george]

@rtmtree

1. Confirm that SSD supports NVME protocol, SATA machines cannot support it
2. ls /dev confirm if any nvme devices have been found
3. Use commands to format the hard drive

sudo mkfs.ext4 /dev/nvme0*

[rtmtree]

@george Thank you.
the ls /dev show nothing NVMe prefix.

I think they gave me wrong SSD

[george]

@rtmtree
Confirm the specific model of this chip and send it out for me to check the specification sheet.

[rtmtree]

@george It's
2342
SM2259XT2G AA
THXW90.00
CH 2H

[george]

@rtmtree
As shown in the figure below, this control chip only supports the SATA3.0 protocol.

[rtmtree]

@george Thanks a lot, I will contact the Aliexpress seller